ben_cb7
11-20-2008, 10:02 PM
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1441.jpg
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1442.jpg
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1444.jpg
Interior:
stock so far
Exterior:
Lifted 1-2 inches in back
replaced hood shocks and the hatch shocks.
new studded snow tires for winter (so i can actually grip the road)
Engine:
Fully Rebuilt Chevy 350 from a 1978 z28 Camaro (the 350 was not an option in '82 so there was a lot of modification done to have an engine this big fit in this car)
Bored out .030 over to technically make it a 355
New pistons, rods, rockers, lifters, and medium cam.
New alternator, power steering pump, distributor and coil, timing chain, spark plugs and wires
New 650 Edlebrock 4 brl Carb, air filter, fuel pump, and oil filter.
New motor mounts, AC delete, battery, radiator and fan shroud.
Rebuilt transmission, custom tranny mount.
Fully custom 3" dual exhaust with no Cat and soon to have no mufflers (the guy who welded them for me wouldnt do it without the mufflers)
here are some more pics that detail the full 2.8L v6 swap to 5.7L v8. TONS of work and took MONTHS:
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1623.jpg
Putting in the new cam
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1627.jpg
Bolted the pistons in and ready to bolt on the heads
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1630.jpg
Attaching oil pan
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1631.jpg
Torquing the rockers
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1632.jpg
Ready to put it in
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1639.jpg
Ready to pull the v6
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1643.jpg
almost out
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1645.jpg
all the way out
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1701.jpg
ready to put the v8 in
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1702.jpg
this part took days!!!
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1721.jpg
getting everything hooked up
http://i234.photobucket.com/albums/ee228/smarty_ben07/enginefinished.jpg
almost done (since that lots has been changed like some of the piping and the thermostat and the alternator and battery and AC delete and the windshield wiper fluid delete and cruise control delete and prolly more i cant think of
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1442.jpg
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1444.jpg
Interior:
stock so far
Exterior:
Lifted 1-2 inches in back
replaced hood shocks and the hatch shocks.
new studded snow tires for winter (so i can actually grip the road)
Engine:
Fully Rebuilt Chevy 350 from a 1978 z28 Camaro (the 350 was not an option in '82 so there was a lot of modification done to have an engine this big fit in this car)
Bored out .030 over to technically make it a 355
New pistons, rods, rockers, lifters, and medium cam.
New alternator, power steering pump, distributor and coil, timing chain, spark plugs and wires
New 650 Edlebrock 4 brl Carb, air filter, fuel pump, and oil filter.
New motor mounts, AC delete, battery, radiator and fan shroud.
Rebuilt transmission, custom tranny mount.
Fully custom 3" dual exhaust with no Cat and soon to have no mufflers (the guy who welded them for me wouldnt do it without the mufflers)
here are some more pics that detail the full 2.8L v6 swap to 5.7L v8. TONS of work and took MONTHS:
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1623.jpg
Putting in the new cam
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1627.jpg
Bolted the pistons in and ready to bolt on the heads
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1630.jpg
Attaching oil pan
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1631.jpg
Torquing the rockers
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1632.jpg
Ready to put it in
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1639.jpg
Ready to pull the v6
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1643.jpg
almost out
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1645.jpg
all the way out
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1701.jpg
ready to put the v8 in
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1702.jpg
this part took days!!!
http://i234.photobucket.com/albums/ee228/smarty_ben07/HPIM1721.jpg
getting everything hooked up
http://i234.photobucket.com/albums/ee228/smarty_ben07/enginefinished.jpg
almost done (since that lots has been changed like some of the piping and the thermostat and the alternator and battery and AC delete and the windshield wiper fluid delete and cruise control delete and prolly more i cant think of