AlienVictim
04-01-2010, 09:54 PM
i drive a 2005 scion tc, its classic silver metallic.
and unlike most scion owners i like my car dirty and unclean. the
more crazy stuff that says its mine the better.:biggrin:
it is modded lightly engine wise, moderately on the exterior, and
heavily interior wise.(but not like tacky cloth crap, gutted)
my car is what i enjoy a go kart for me to play in, i enjoy it a lot.
i dont take myself seriously, and even if your driving a Lamborghini i
feel we will get along. but respect is that if you refuse to give it dont
expect it "even if your ride costs a lot". but if your cool with me than
we are cool and that's that..
enough with the talk. (listing mods will take a bit so heres the pics.)
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=782
alrighty, this angle shows these mods.
debadged hatch garnish, painted graphite to match my rims and harness bar.
my 08 tail swaps
xxr006 rims painted graphite, and custom made accent decals (for a one off oem look)
oem lip kit (installed because oddly enough it looks great....)
decals showing specific to the back half of the car:
tinting
trd axleback exhaust system
barely visible drift charm made to look like my avatars demon.
-gas cap (2010 scion poker run/ charity run)
-toyota logo
-bigass scion text on hatch garnish...
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=781
stubby antenna (teeny tiny, dangerous, and lethal dont fall face down on it or you may die)
modified side mirrors. (the drivers side has been splodied going trough the mc donalds drive through. lol)
-jb weld fixes anything i swear
decals in the front near the door and the lip kit:
-bride seats decal
-sparco decal
-xxr rims decal
-scion logo
if you can see them i removed and painted my calipers orange......YEAH!!!
Megan racing springs 2.5 drop (wooptidoo lol)
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=783
Modded 05 headlights:
-projecters, but on the inside (setup as low beams)
-halos installed but i opted to keep the low intensity halos instead of installing the cathode ones i have.
Tow hook fabbed by me and my friend erik (kanchi on sl) we welded a set of brass knuckles on that bitch.
Decals...again more decals...:
-demon head (my artwork)
-scionlife forums decal
Half of my custom grille, matches the grille on my cf hood.
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=798
and fun fact, this bumper was ripped halfway off at english
racing during a charity dyno event. apparently my car was
the only oops they have had, lucky me.....but it was for a
charity cant complain.
sadly i was the only low hp car to go to a charity event....wtf?
really i mean it was a charity to help a kid get money for hospital bills.
and i was also the only scion to attend......BALLS! BABY!!!
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=804
my amazingly average and in no way stunning dyno graph....lol
so i drove home and had to make new aluminum mounts all around
for my front bumper, repair my paint. and than me an my friend erik
straightened and re welded the spot welds that had been ripped open
by the dyno straps when my car almost slid off the dyno machine....lol
gotta love being charitable sometimes... hahaha and after the work
you cant tell it was ever broken.
(all in all english racing was working very hard to make money for that kid so i understood.)
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=788
more about my stupid headlights, i modded them
on my apt floor with a screwdriver and a box knife.....lol
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=784
Decals Decals Decals!!! from top to bottom ill only explain the weird ones.
-Pogue Status decal, (smiley) i made to poke fun at the "rogue status" decal all the scion folks are using.
-CDM as f*ck, "Chinese domestic market" designed to poke fun at a beloved decal. also a personal statement.
-Badzt Maru....lol the guy version of the hello kitty crap....
-Pedo bear, a great way to keep parents children from getting near my car with their little carnie hands....
-Ebay racing, another decal i designed as a joke.
-scion emblem i drew up when i was bored, like it so i figured i would use it.
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=785
Stripped interior
Sparco harness bar. lol from speedware motorsports. meant for an integra, i have 4 of them....dont ask....lol
-and yes they are real.........hehehehe
Bride racing seats
C-pillar brace (made out of solid aluminum bar, with a civic strut tower bar mount modified as a bolt in bracket)
Schroth 4 point racing harnesses. (i drive a little hard sometimes....)
-modified the setup so the stock seat-belts still work. (hard to refit harnesses to every passenger)
Fix a flat.....lol
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=786
painted center dash black, decals AGAIN!!! signed by tanner faust and ken gushi.
custom gauge faceplates, resoldered bright white led's.
interior lighting kit......probably going to sell. (came with car, go scion)
obx shit knob
Fidanza short shifter, (was sent wrong shifter denied replacement) chopped it shorter and and angled it.
Aluminum shifter cage bushings.
Sweet ass metal pedal covers........ugh. lol
manufactured door handles from aluminum flat bar.
made electronic mounts for door swithes and locks
custom moisture barriers/door panels.
black paint work on top of door and along window frame.
Skeleton i got at one of my first events.
double din kenwoood touchscreen dvd.
phoenix gold tantrum 500.2 amp.
10 inch crappy bazooka sub/box (light weight) with additional 376 watt 8 inch jensen sub.
ignition/starter kill.
"gorilla grip" club (also known as a cudgel)
"the club" club
"the club" clutch club
gps security subscription goodies.
alarm system.....
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=794
my harness bar setup with seats, hadn't installed my harnesses at that time yet.
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=787
My XXR006 rims. they used to be black with a chrome ring.....ewww.
i bought them because my friend had them and they were cheap with a full set of tires.
$300
so i do what i do to everything....i filled nicks. sanded primed them with self etching primer.
and went to town with graphite rim paint.
you would be amazed at the damage that can be repaired with simple putty
paste. elbow grease and a little bit of awesome! KACHOW! PAPOW!!!!!
PEW PEW...lazer noises!
and i made oversized xxr decals for the rims (i wanted an oem look.)
(crickets, and silence)
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=789
a rolling pic taken by my friend nate before the rims were painted. on the freeway
northbound in front of the tacoma dome!
one of my favorite rolling shots of my car ever.
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=790
cf hood my forum buddies bought from a friend "used" for a Christmas present. they all
chipped in bwcause i like to help other people a lot .since i used to work with composites
and paint my own crap and a hobby (no poo jokes) i prepped the hood by sanding it,
used some vinyl as a mask. and than sprayed it with vht nightshades to tint the outer
areas, removed the masking and gave it two more coats.
haven't seen anyone else do this. its cool because even in the dark areas you can see the
cf weave through the tint. i hope to get a better hood and do the same thing. but right
now i'm happy with it.
(also before i installed the hood pins vtr gave me for Christmas...wayne rules. and great shop)
engine boltons/mods: (ill take pics soon) nothing great just a lot of small supporting mods..
-megan racing headers 4-1, wanted mid/top end hp more than bottom end torque.
-EBAY CAI with another Ebay bypass filter. i got a fujita emblem from a friend and slapped it on.
funny how parts whores cant tell the difference without a label....slap!
-CAI bypass filter water shield, made from aluminum, detailed with demon head design on bumper.
-DEI header wrap, silicon sprayed to keep ambeint heat soak at a minimum.
-Hood spacers from lowe's hardware, a no-no to scion e-thugs. but to any
other forum group a valuable cheap cooling mod....lol go figure...
-Torque dampener, yes it does help.
-sweet ass billet battery tie down, and oil cap.
-custom art on engine cover.
-megan racing front strut tower bar.
i spent 60 dollars on cooling mods to remove heat equal to that of a new racing radiator.....
i dont care if my headers aren't shiny....i saved 350 dollars.
================================================== =======
update: new decal!
Okay so i designed a decal, its supposed to be confusing and make fun of jdm crap...lol
it works, and here it is.
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=791
now here's where this jdm character came from (0:27 secs in....you will die of laughter.....lol)
http://www.youtube.com/watch?v=GNU9vDhvc04
yeah im strange....lolz
a clip from the movie my demon in my avatar comes from lol.
http://c2.ac-images.myspacecdn.com/images02/128/l_999bac44acba44c7bf53dfc3ceda9bb1.gif
and unlike most scion owners i like my car dirty and unclean. the
more crazy stuff that says its mine the better.:biggrin:
it is modded lightly engine wise, moderately on the exterior, and
heavily interior wise.(but not like tacky cloth crap, gutted)
my car is what i enjoy a go kart for me to play in, i enjoy it a lot.
i dont take myself seriously, and even if your driving a Lamborghini i
feel we will get along. but respect is that if you refuse to give it dont
expect it "even if your ride costs a lot". but if your cool with me than
we are cool and that's that..
enough with the talk. (listing mods will take a bit so heres the pics.)
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=782
alrighty, this angle shows these mods.
debadged hatch garnish, painted graphite to match my rims and harness bar.
my 08 tail swaps
xxr006 rims painted graphite, and custom made accent decals (for a one off oem look)
oem lip kit (installed because oddly enough it looks great....)
decals showing specific to the back half of the car:
tinting
trd axleback exhaust system
barely visible drift charm made to look like my avatars demon.
-gas cap (2010 scion poker run/ charity run)
-toyota logo
-bigass scion text on hatch garnish...
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=781
stubby antenna (teeny tiny, dangerous, and lethal dont fall face down on it or you may die)
modified side mirrors. (the drivers side has been splodied going trough the mc donalds drive through. lol)
-jb weld fixes anything i swear
decals in the front near the door and the lip kit:
-bride seats decal
-sparco decal
-xxr rims decal
-scion logo
if you can see them i removed and painted my calipers orange......YEAH!!!
Megan racing springs 2.5 drop (wooptidoo lol)
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=783
Modded 05 headlights:
-projecters, but on the inside (setup as low beams)
-halos installed but i opted to keep the low intensity halos instead of installing the cathode ones i have.
Tow hook fabbed by me and my friend erik (kanchi on sl) we welded a set of brass knuckles on that bitch.
Decals...again more decals...:
-demon head (my artwork)
-scionlife forums decal
Half of my custom grille, matches the grille on my cf hood.
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=798
and fun fact, this bumper was ripped halfway off at english
racing during a charity dyno event. apparently my car was
the only oops they have had, lucky me.....but it was for a
charity cant complain.
sadly i was the only low hp car to go to a charity event....wtf?
really i mean it was a charity to help a kid get money for hospital bills.
and i was also the only scion to attend......BALLS! BABY!!!
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=804
my amazingly average and in no way stunning dyno graph....lol
so i drove home and had to make new aluminum mounts all around
for my front bumper, repair my paint. and than me an my friend erik
straightened and re welded the spot welds that had been ripped open
by the dyno straps when my car almost slid off the dyno machine....lol
gotta love being charitable sometimes... hahaha and after the work
you cant tell it was ever broken.
(all in all english racing was working very hard to make money for that kid so i understood.)
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=788
more about my stupid headlights, i modded them
on my apt floor with a screwdriver and a box knife.....lol
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=784
Decals Decals Decals!!! from top to bottom ill only explain the weird ones.
-Pogue Status decal, (smiley) i made to poke fun at the "rogue status" decal all the scion folks are using.
-CDM as f*ck, "Chinese domestic market" designed to poke fun at a beloved decal. also a personal statement.
-Badzt Maru....lol the guy version of the hello kitty crap....
-Pedo bear, a great way to keep parents children from getting near my car with their little carnie hands....
-Ebay racing, another decal i designed as a joke.
-scion emblem i drew up when i was bored, like it so i figured i would use it.
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=785
Stripped interior
Sparco harness bar. lol from speedware motorsports. meant for an integra, i have 4 of them....dont ask....lol
-and yes they are real.........hehehehe
Bride racing seats
C-pillar brace (made out of solid aluminum bar, with a civic strut tower bar mount modified as a bolt in bracket)
Schroth 4 point racing harnesses. (i drive a little hard sometimes....)
-modified the setup so the stock seat-belts still work. (hard to refit harnesses to every passenger)
Fix a flat.....lol
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=786
painted center dash black, decals AGAIN!!! signed by tanner faust and ken gushi.
custom gauge faceplates, resoldered bright white led's.
interior lighting kit......probably going to sell. (came with car, go scion)
obx shit knob
Fidanza short shifter, (was sent wrong shifter denied replacement) chopped it shorter and and angled it.
Aluminum shifter cage bushings.
Sweet ass metal pedal covers........ugh. lol
manufactured door handles from aluminum flat bar.
made electronic mounts for door swithes and locks
custom moisture barriers/door panels.
black paint work on top of door and along window frame.
Skeleton i got at one of my first events.
double din kenwoood touchscreen dvd.
phoenix gold tantrum 500.2 amp.
10 inch crappy bazooka sub/box (light weight) with additional 376 watt 8 inch jensen sub.
ignition/starter kill.
"gorilla grip" club (also known as a cudgel)
"the club" club
"the club" clutch club
gps security subscription goodies.
alarm system.....
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=794
my harness bar setup with seats, hadn't installed my harnesses at that time yet.
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=787
My XXR006 rims. they used to be black with a chrome ring.....ewww.
i bought them because my friend had them and they were cheap with a full set of tires.
$300
so i do what i do to everything....i filled nicks. sanded primed them with self etching primer.
and went to town with graphite rim paint.
you would be amazed at the damage that can be repaired with simple putty
paste. elbow grease and a little bit of awesome! KACHOW! PAPOW!!!!!
PEW PEW...lazer noises!
and i made oversized xxr decals for the rims (i wanted an oem look.)
(crickets, and silence)
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=789
a rolling pic taken by my friend nate before the rims were painted. on the freeway
northbound in front of the tacoma dome!
one of my favorite rolling shots of my car ever.
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=790
cf hood my forum buddies bought from a friend "used" for a Christmas present. they all
chipped in bwcause i like to help other people a lot .since i used to work with composites
and paint my own crap and a hobby (no poo jokes) i prepped the hood by sanding it,
used some vinyl as a mask. and than sprayed it with vht nightshades to tint the outer
areas, removed the masking and gave it two more coats.
haven't seen anyone else do this. its cool because even in the dark areas you can see the
cf weave through the tint. i hope to get a better hood and do the same thing. but right
now i'm happy with it.
(also before i installed the hood pins vtr gave me for Christmas...wayne rules. and great shop)
engine boltons/mods: (ill take pics soon) nothing great just a lot of small supporting mods..
-megan racing headers 4-1, wanted mid/top end hp more than bottom end torque.
-EBAY CAI with another Ebay bypass filter. i got a fujita emblem from a friend and slapped it on.
funny how parts whores cant tell the difference without a label....slap!
-CAI bypass filter water shield, made from aluminum, detailed with demon head design on bumper.
-DEI header wrap, silicon sprayed to keep ambeint heat soak at a minimum.
-Hood spacers from lowe's hardware, a no-no to scion e-thugs. but to any
other forum group a valuable cheap cooling mod....lol go figure...
-Torque dampener, yes it does help.
-sweet ass billet battery tie down, and oil cap.
-custom art on engine cover.
-megan racing front strut tower bar.
i spent 60 dollars on cooling mods to remove heat equal to that of a new racing radiator.....
i dont care if my headers aren't shiny....i saved 350 dollars.
================================================== =======
update: new decal!
Okay so i designed a decal, its supposed to be confusing and make fun of jdm crap...lol
it works, and here it is.
http://www.nwtuner.com/forum/picture.php?albumid=91&pictureid=791
now here's where this jdm character came from (0:27 secs in....you will die of laughter.....lol)
http://www.youtube.com/watch?v=GNU9vDhvc04
yeah im strange....lolz
a clip from the movie my demon in my avatar comes from lol.
http://c2.ac-images.myspacecdn.com/images02/128/l_999bac44acba44c7bf53dfc3ceda9bb1.gif